Phase Transition Phenomenon
Surfactant solubility shifts induced by thermal fluctuations can impair process water clarification, optical measurement, and chemistry delivery across industrial papermaking systems. Non-ionic surfactants and defoaming agents undergo reversible phase separation when process temperatures exceed specific thermal thresholds, producing insoluble colloidal droplets in aqueous process streams. The resulting cloud point interference degrades sensor accuracy in turbidity meters, photometric consistency analyzers, and drainage monitoring apparatus.
When suspended surfactant micelles reach their transition temperature, hydrophobic aggregation scatters incident light, registering false solids readings in clean white water loops. Systems operating between 45 and 65 degrees Celsius experience sudden baseline drift in optical control loops due to this physical phase transition.
Wet End Chemistry Impact
Papermaking additives destabilize when process water passes through unmonitored temperature transitions. Sizing agents, retention chemistries, and wet strength polyamidoamine-epichlorohydrin resins exhibit altered deposition behavior when surfactant cloud points coincide with headbox temperatures. The micellar droplets generated by non-ionic defoamers aggregate onto pulp fibres unevenly, reducing local hydrogen bonding efficiency.
Formation indices drop as fibre flocculation changes under erratic retention chemistry activation. Microscopic surfactant droplets can also deposit directly on forming fabrics, press felts, and drying cylinder surfaces, producing hydrophobic spots on finished packaging board. Sizing efficiency, measured by Cobb water absorption tests, shows localized failures where surfactant residues prevent complete wax or alkyl ketene dimer orientation.
Mill chemists mitigate this destabilization by selecting surfactants with cloud points positioned at least ten degrees above peak seasonal white water operating temperatures.
Optical Measurement Error
Automated optical instruments in effluent treatment and stock preparation lines mistake thermal phase separation for fibre fines or inorganic filler losses. Turbidity sensors utilizing 860-nanometre nephelometric detection report sudden excursions that trigger unwarranted coagulant dosing. Excessive chemical addition wastes coagulants and destabilizes the charge balance of the thin stock loop.
Temperature compensation algorithms and wavelength-adjusted sensors separate true particulate concentrations from thermal surfactant precipitation.