Removal Ratio
Numerical expression of a recycling process step to eliminate chemical contaminants, non-polymeric residues, and printing ink constituents from post-consumer packaging substrates establishes regulatory compliance for direct food contact. Decontamination efficiency evaluates the concentration reduction of challenge chemicals introduced into the material matrix before and after thermal, mechanical, or chemical cleaning stages. Regulators assess these values against toxicological migration limits using defined surrogate chemicals that mimic volatile, semi-volatile, polar, and non-polar contaminants.
Calculating cleaning capability relies on gas chromatography mass spectrometry to quantify residual surrogates extracted from the processed secondary flake or repulped stock. The boundary of this metric ceases at physical macro-contaminants, addressing solely molecular and microscopic impurities absorbed within the polymer or cellulosic matrix.
Extraction Mechanics
High temperatures applied under deep vacuum during solid-state polycondensation strip diffused volatile molecules out of polyethylene terephthalate flakes. Cleaning rate depends directly on residence time, vacuum level, process temperature, and flake thickness. In cellulose repulping, caustic washing and flotation deinking detach mineral oil hydrocarbons, flexographic resins, and photoinitiator residues from recovered fibers.
Polymeric chains exhibit varying diffusion coefficients that dictate decontamination kinetics, meaning heavier molecular weight contaminants require extended extraction windows.
Compliance Verification
Challenge testing standards established by food safety authorities require minimum cleaning thresholds before secondary materials can re-enter primary food packaging applications. Migration modeling demonstrates whether residual concentrations in cleaned secondary packaging will exceed dietary exposure limits. When virgin fiber folding boxboard incorporates recycled layers, functional barrier plies must prevent migration if cleaning efficiency drops below target thresholds.
Operating parameters inside the reactor must remain within validated setpoints to maintain continuous certification.