Centrifugal Transport
Fluid dynamics in conical separators govern the split between accepted fiber streams and rejected heavy contaminants during stock cleaning operations. Undesirable hydrocyclone underflow entrainment carries usable papermaking fibers down into the reject discharge tip alongside sand, staples and ink particles. Apex nozzle diameter and pressure drop determine the volume of fluid exiting through the bottom port.
Accept Loss Mechanism
High rotational velocities inside centrifugal cleaners force dense particles outward against the conical wall while creating a central air core that carries accepted fibers upward to the top discharge. Boundary layer turbulence near the lower apex nozzle disrupts this primary vortex split, pulling long fibers into the downward reject stream. Dilution water addition at the lower cone section alters local fluid viscosity, helping to free trapped fibers before discharge without compromising heavy contaminant removal.
Excessive apex throttling increases fiber carryover into reject lines, raising raw material costs in recycled paper mills. Proper hydraulic balance prevents fiber loss while maintaining sand removal efficiency.
Rejection Control
Multistage cleaner cascades recover entrained fibers by routing primary underflow to secondary and tertiary hydrocyclone units. Excessive reject consistency leads to apex plugging and hydraulic instability. Optimized underflow geometry reduces yield loss in fiber preparation systems.