Conditioning Protocol
Standard testing practices establish the environmental parameters required to evaluate paper and paperboard under reproducible conditions. Technical procedures defined by astm d685 specify a constant temperature of 23 degrees Celsius and a relative humidity of 50 percent for preconditioning and testing paper products. Paper fibers absorb or desorb water molecules based on ambient air conditions, which alters mechanical properties such as tensile strength and bursting resistance.
Compliance requires samples to remain in the controlled atmosphere until mass equilibrium is reached, establishing a stable moisture baseline across comparative material batches. Physical testing without proper preconditioning distorts load values because moisture acts as a plasticizer within the cellulosic matrix.
Moisture Equilibrium
Hysteresis in cellulosic fibers causes paper to retain different moisture levels depending on whether the sheet approaches equilibrium from a drier or wetter state. Standardized preconditioning in a low humidity environment forces the material to absorb moisture during final conditioning under astm d685, eliminating discrepancies caused by sorption history. Fiber swelling during moisture uptake expands sheet dimensions.
Tests performed without prior conditioning produce scattered values that fail standard reproducibility criteria.
Environmental Tolerance
Deviations beyond specified temperature or moisture boundaries alter test results beyond acceptable laboratory error limits. Continuous monitoring of ambient conditions ensures that data generated under astm d685 reflects intrinsic material performance rather than ambient room fluctuations. High humidity softens internal bonds.