Optical Dispersion
Wavelength-dependent focal dispersion separates spectral components along the central optical path within refractive lens assemblies. In optical surface metrology, axial chromatic aberration converts physical height variations into distinct peak spectral frequencies along the measurement axis. The physical effect governs non-contact topography profiling across barrier-coated boards and supercalendered papers.
Refractive indexing ceases to correlate with spatial distance when light hits completely opaque, non-reflective voids.
Confocal Profilometry
Specialized optical heads exploit colour fringing by focusing red light further away than blue light across a defined optical depth. When white light illuminates a sheet of folding boxboard, only the specific wavelength focused exactly on the coating plane reflects back through a matching spatial pinhole. A calibrated spectrometer identifies this reflected peak wavelength, translating the returned optical signal into an exact surface height coordinate without touching the delicate coating.
Optical metrology measures roughness profiles continuously across wet or sticky ink layers where mechanical styluses tear the surface. Surface slope angles exceeding forty degrees divert reflected light away from the collection optics, setting the operational boundary for tracking steep topographic features.
Measurement Range
Sensor measurement ranges typically span from fifty micrometres to ten millimetres, dictated by lens selection and optical geometry. Within this calibrated zone, axial chromatic aberration delivers sub-micron resolution on high-speed press runs.