Hardening Mechanism
Chemical reactions involving atmospheric oxygen transform liquid vegetable oils into solid polymer networks within printing ink films. The process of crosslinking auto-oxidation occurs when unsaturated fatty acids react with oxygen to form hydroperoxides. These reactive intermediates decompose into free radicals that initiate the formation of covalent bonds between polymer chains.
Hardening proceeds from the surface downward as oxygen diffuses into the ink layer.
Drying Rate
Transition metals act as catalysts to accelerate the breakdown of peroxides into radicals. Inks that utilize crosslinking auto-oxidation often contain cobalt or manganese driers to ensure the film sets within a timeframe suitable for commercial production. Drying speed depends on the availability of oxygen and the concentration of double bonds in the resin vehicle.
High humidity or low temperatures slow the reaction significantly.
Environmental Limitation
Gas exchange at the surface remains the primary factor governing the completion of the curing cycle. Thick layers of ink might skin over before the interior has fully hardened, leading to a soft core that is prone to smearing or marking. Because crosslinking auto-oxidation consumes oxygen, air circulation around the printed stacks is necessary to prevent the buildup of heat or odours.
The reaction continues slowly for weeks after the initial set, gradually increasing the rub resistance and chemical stability of the printed image. If the substrate is highly acidic, it may inhibit the metallic driers and stop the drying process entirely.