Rheological Resistance
Internal cohesion measures the force required to split a wet film of liquid between two surfaces. In the printing process, ink tack defines the pull exerted on the paper surface as the ink film separates during high speed transfer from the blanket to the substrate. Correct levels ensure that the fluid transfers cleanly without picking or delaminating the paper fibres.
Pressroom Interaction
Electronic inkometers measure this property by calculating the torque required to rotate a set of rollers coated with the test fluid. The value of ink tack depends heavily on temperature and the speed of the press, as the viscosity of the vehicle changes under shear. If the resistance is too high, the ink may pull the coating off a poorly bonded sheet or cause the web to break.
Sequential Trapping
Multicolour printing requires a specific gradient of values to ensure that each subsequent layer of pigment adheres correctly to the previous one. This sequence usually involves printing the highest value first and decreasing the levels for each later unit. Poorly managed gradients result in back-trapping, where the earlier ink is pulled off the sheet by the later unit instead of accepting the new layer.
High speed production depends on maintaining these values within a tight tolerance to prevent colour shifts.