Contaminant Class
Low-density non-cellulosic impurities such as plastics, hot melt adhesives, adhesive tapes, and expanded polystyrene separate from recycled fibre slurries during stock preparation. Managing light rejects prevents sticky debris from contaminating paper machine wires and causing web breaks. Reverse hydrocyclones and slotted pressure screens isolate these contaminants based on density differentials and particle size.
The collected material forms a waste stream that requires dewatering before disposal.
Removal Process
Centrifugal forces in reverse cleaners push low-density contaminants toward the central core of the hydrocyclone while heavy fibres move to the outer wall. Light rejects exit through the top overflow port while cleaned stock accepts exit through the bottom. Fine slotted screens with aperture sizes down to zero point one zero millimeters capture flexible film fragments that pass through coarse pulper screens.
Sticky particles known as stickies aggregate in the light reject stream, requiring chemical passivating agents to prevent re-deposition on machinery. Effluent treatment systems dewater this reject stream using screw presses to achieve landfill dry-solids targets. Efficient removal preserves paperboard strength and surface smoothness for high-speed printing applications.
Yield Penalty
Excessive discharge of light rejects reduces overall fibre recovery yields and increases waste handling costs for recycled paper mills. Stock preparation systems balance contaminant removal efficiency against unwanted cellulose loss in the reject stream. The designation applies exclusively to low-density solids and excludes dissolved organic compounds or heavy grit.