Pressure Equalization
Layers of paper or board inserted beneath the cutting die or printing plate adjust the local impression pressure across the press. This micro-adjustment process, known as make-ready packing, compensates for tiny variations in the height of the steel rules or the metal plates. Without this packing, some areas of the sheet would receive too much pressure, causing premature wear, while other areas would be under-inked or not cut through.
Operators build up these layers gradually using thin, stable paper sheets to achieve uniform pressure across the entire layout.
Material Selection
Calibrated paperboard or specialty synthetic sheets are chosen for their resistance to compression under heavy repeated loads. Common materials include glassine or hard-calendered paper that does not compress easily or lose its thickness during a long production run. If the material is too soft, the pressure will drop as the run progresses, requiring the operator to stop the machine and rebuild the packing.
Press Alignment
Precise thickness control is necessary to keep the cylinder diameters in perfect balance with the bed of the press. Incorrect thickness can cause slippage between the paperboard and the plate, leading to slurring or register errors. Technicians use micrometers to measure each sheet before adding it to the packing pile.