Transmission Distance
Light propagation through a liquid slurry or a paper sheet determines the quantity of energy absorbed by chemical compounds at specific wavelengths. Adjusting the optical pathlength modifies the sensitivity of in-line spectrometers used to monitor moisture or chemical dosage in papermaking. The physical distance between the light source and the receiver must be optimized for the opacity of the medium.
Shorter distances prevent signal loss when measuring highly opaque or dense paperboard stocks.
Signal Amplitude
Transmitted light intensity decreases exponentially with the thickness of the sample according to the Beer-Lambert law of absorption. When the optical pathlength is too long, the detector receives insufficient light, resulting in a low signal-to-noise ratio that obscures chemical signatures. Reducing the gap between the fiber-optic probes increases the signal strength and allows the sensor to detect subtle changes in resin or clay content.
In wet end monitoring, the presence of suspended fibers requires a self-cleaning flow cell with a narrow gap to prevent clogging. Keeping this distance stable is necessary for obtaining reproducible measurements across different paperboard grades.
Sensor Calibration
Geometry adjustments in the measuring head must be accounted for during the initial setup of the optical instrumentation. Variations in the optical pathlength require recalibration of the absorption coefficients to prevent erroneous moisture readings in the final paper sheet. Regular inspection of the probe housing maintains the accuracy of the spectral data.