Recyclability Assessment
Standardized laboratory protocols evaluate the repulpability and coarse reject fraction of paper and paperboard packaging materials during recycling processes. For European packaging verification, pts method rh 021/97 specifies testing conditions to determine whether coated or laminated paperboard can be re-pulped in standard stock preparation systems. The method quantifies the mass percentage of non-defibered flakes and sticky contaminants remaining after wet disintegration.
Testing stops at assessing laboratory-scale repulpability without predicting full-scale mill water circuit chemistry.
Disintegration Protocol
Laboratory technicians disintegrate packaging samples in water under standardized temperature and mechanical agitation parameters. The resulting pulp slurry passes through a slotted screen with a point one five millimeter width to separate usable cellulose fibers from insoluble residues. Under pts method rh 021/97, the mass of material retained on the screen is dried and weighed to calculate the reject fraction relative to initial sample weight.
Coatings that fragment into micro-stickies or laminates that fail to release fiber yield high reject percentages. The test also evaluates sheet formation capability using recovered fibers to detect optical defects or reduced bonding strength.
Pass Threshold
Packaging materials yielding reject levels above established percentage thresholds fail recyclability certification. Compliance with pts method rh 021/97 confirms paperboard compatibility with standard papermaking recycling circuits.