Water Extraction
Measured against initial slurry water content, mechanical dewatering raises reject solids levels to prepare waste streams for efficient transport or thermal disposal. Recycling stock preparation plants apply rejects thickening to concentrate screening debris, plastics and knots from less than two percent solids up to thirty percent solids. Removing free water minimizes effluent treatment loads and prevents water loss from the stock loop.
Efficient thickening equipment isolates process water and returns it directly to pulper dilution circuits.
Equipment Operation
Mechanical dewatering utilizes specialized mechanical devices such as inclined screw presses, drum thickeners, wire presses and disk filters. Slurry enters a screw press at low consistency where an Archimedean screw forces the material against a tapered perforated screen plate. Compressive force increases along the flighting length, expelling liquid through small screen perforations while transporting compacted solids to the discharge chute.
Higher inlet consistency and optimized rotation speeds improve rejects thickening effectiveness, producing cake dryness levels suitable for thermal energy recovery. Polymer flocculants are added in some systems to consolidate fine particles and increase water drainage rates. Slotted screen basket wear reduces dewatering pressure, requiring periodic maintenance to prevent solid carryover into filtrate tanks.
Sludge Handling
Dewatered waste material reduces haulage truck volume and lowers landfill disposal charges. High dry solid content allows self-sustaining combustion in biomass boilers, turning waste material into steam power. Inadequate dewatering causes leachate leakage during waste storage and transport.