Molecular Mapping
Optical analysis identifies chemical composition by measuring the inelastic scattering of light from sample surfaces. Confocal raman spectroscopy adds a pinhole aperture to this optical path, which rejects out of focus light and allows the capture of high resolution depth profiles. This configuration defines the specific volume of interest within a substrate, excluding signals from the surrounding bulk material or surface contaminants.
Precise spatial resolution along the vertical axis enables the characterization of thin film coatings on paper without interference from the cellulose fibres beneath.
Component Distribution
Manufacturers use this instrumentation to verify the uniformity of barrier coatings applied to food packaging materials. Scanning across the surface generates an intensity map that indicates the concentration of polymers or waxes at specific coordinates. Variations in spectral intensity reveal areas where coating thickness falls outside defined operational tolerances or where pinholes degrade moisture barriers.
Data acquisition cycles rely on short integration times to prevent thermal degradation of sensitive organic layers during scanning.
Signal Sensitivity
Detection limits depend on the efficiency of the excitation laser and the throughput of the spectrometer grating. High signal noise ratios require specific exposure settings to distinguish low intensity peaks from the background fluorescence of additives in the substrate. Strong spectral signatures depend on the molecular vibrations of the target compound rather than the physical density of the sample.
Precise laser alignment maintains consistent calibration across multiple production batches of converted paper stock.