Solvent Analysis
Quantitative determination of non-volatile organic matter in paperboard or pulp provides critical data regarding the presence of residual processing aids and natural resins. Through dichloromethane extraction, laboratory technicians isolate solvent-soluble substances such as natural resins and synthetic sizing agents from the cellulose matrix. This procedure measures the concentration of extractives that could migrate into food products or affect the printability of the board.
It relies on the high solvency power of dichloromethane and its low boiling point of forty degrees Celsius. The process leaves behind a dry residue that is weighed to calculate the gravimetric percentage of the extractable material.
Pulp Chemistry
Excess natural resins in wood pulp can deposit on mill machinery or cause issues during the papermaking process. If dichloromethane extraction reveals a high concentration of pitch, the mill must introduce specialized dispersants or washing steps to prevent web breaks. Natural fats and fatty acids can migrate to the sheet surface, where they lower surface energy and interfere with ink adhesion.
Chemical monitoring using this solvent allows mills to optimize their bleaching and washing stages before the pulp is converted into paperboard.
Laboratory Protocol
Soxhlet extraction apparatus is utilized to continuously wash the pulp sample with warm solvent. This cycle runs for several hours to ensure complete extraction of the soluble lipids. After extraction, the solvent is evaporated under a vacuum to isolate the residue.
Weighing the dry residue yields the final percentage.