Structural Failure
Internal delamination describes a failure where the layers of a multi-ply paperboard separate during mechanical processing. This occurrence of face splitting happens most frequently when the Z-direction tensile strength is lower than the external forces applied by the equipment. It is distinct from surface picking where only individual fibres or coating particles are removed.
Mechanical Stress
High ink tack and rapid separation of the sheet from the blanket create the tension that initiates this defect. As the printing press speed increases, the force required to pull the sheet away from the ink film rises greatly. If the bond between the top liner and the underliner is weak, the sheet tears apart within its thickness.
Speed dictates the stress. Testing for this property usually involves a Scott Bond instrument to measure the energy absorbed during a high-speed impact. A low energy reading suggests that the internal starch bonding or the refining level of the middle plies is insufficient to handle the demands of modern printing presses.
Converting Impact
Failures of this type often render the entire production run unusable. In folding carton production, the crease area becomes a point of vulnerability where the board must resist the shearing forces of the scoring blades. Weak internal bonding leads to unsightly bulges or complete ruptures on the finished package.
Proper starch application and refining at the wet end of the paper machine are the primary methods for ensuring sufficient ply adhesion.