Phase Equilibrium
Proportional equilibrium between fountain solution and oil-based ink on lithographic offset printing plates maintains clean non-image areas while transferring crisp ink images. Offset lithography relies on hydrophobic and hydrophilic surface separation, where moisture balance governs the emulsion state formed between water and ink during high-speed cylinder rotation. Excess water breaks down ink film tack and creates washouts across solid areas.
Insufficient water allows ink to adhere to non-image plate regions, causing background toning across the web.
Lithographic Emulsification
Dampening rollers deliver thin aqueous films to non-image plate areas before inking rollers apply oil-based ink to hydrophobic image areas. Shear forces within inking roller nips emulsify water into the ink film, forming a water-in-oil emulsion that must remain within fixed percentage ranges for stable transfer. Surfactants and alcohol replacements in fountain solution lower interfacial tension to promote thin, uniform water films across plate surfaces.
Temperature shifts on ink rollers alter fluid viscosity and emulsification rate, shifting water requirements during long press runs. Alcohol concentration and pH level govern dampening solution surface tension and plate wetting characteristics. Continuous monitoring of ink train temperature and fountain solution conductivity prevents emulsion breakdown during high-speed printing.
Dimensional Stability
Imbalanced dampening water levels induce paperboard dimensional changes, causing register mis-alignment across multi-color printing units. Paper webs absorb excessive fountain solution, which lowers surface strength and causes fiber picking in downstream offset nips. Moisture balance controls ink drying speed and surface gloss development on coated packaging boards.