Analytical Medium
Standardized chemical liquids and synthetic media designed to mimic the extraction properties of actual food categories represent the testing vehicles used to verify migration safety in packaging materials. Designated as solvent extraction food simulants, these media replace complex foodstuffs during formal laboratory exposure testing under controlled time, temperature and surface-contact parameters. Regulatory systems define specific media formulations to represent aqueous, acidic, alcoholic, fatty and dry foods without encountering the analytical interferences inherent to processing real food substances.
By exposing printed, coated or barrier-treated paperboard substrates to these simulants, analytical laboratories quantify the total and specific transfer of volatile compounds, ink residues, heavy metals and plasticizers into consumer goods.
Simulant Assignment
Harmonized packaging regulations designate precise chemical agents for specific commodity profiles. Distilled water or ten percent ethanol simulates aqueous products, while three percent acetic acid challenges the packaging substrate under low pH conditions to test for heavy metal extraction and acid-catalysed hydrolytic breakdown. Twenty percent and fifty percent ethanol formulations simulate milk, dairy emulsions and high-alcohol beverages.
Olive oil acts as the standard European reference simulant for pure fatty foods, frequently replaced by alternative media like ninety-five percent ethanol or isooctane to facilitate laboratory gas chromatography without the severe matrix interferences caused by triglyceride oils. For dry or frozen food testing, poly(2,6-diphenyl-p-phenylene oxide), known commercially as Tenax, acts as a solid sorbent simulant that captures volatile migrants traversing packaging walls via gas-phase diffusion.
Exposure Mechanics
Testing requires mounting packaging samples into specialized migration cells that isolate the food-contact surface from the exterior environment. The solvent extraction food simulants are placed in direct contact with the inner board face at specific time-temperature combinations, such as ten days at forty degrees Celsius for long-term room-temperature storage, or two hours at seventy degrees Celsius for hot-fill processing. In cases where package geometry precludes cell mounting, total immersion tests place entire board cuts into liquid media, though this approach exposes porous cut edges and requires correction for raw edge wicking.
Once exposure completes, the simulant is decanted, concentrated and injected into chromatographic instruments to isolate, identify and quantify transferred compounds against statutory limit tables.