Analytical Method
Analytical testing submerged an entire packaging sample into liquid food simulants to measure overall chemical migration from paperboard substrates. Performing total immersion extraction quantifies the mass of non-volatile substances that transfer from both contact and non-contact surfaces into food contact media. Testing protocols apply specific solvents such as ethanol or chemical substitutes for defined time and temperature profiles.
The test represents a worst-case exposure scenario by wetting cut edges and reverse sides. Standard single-side cell tests isolate only the designated food-contact face.
Laboratory Dynamics
Liquid simulants extract volatile organic compounds, sizing agents, and coating additives from the paperboard structure. During total immersion extraction, the test fluid penetrates exposed internal fibers along cut sample edges, increasing measured mass transfer values. Laboratories correct for edge effect absorption using mathematical surface area formulas or edge-sealing wax barriers.
Evaporation of the simulant leaves a dry residue that is weighed to calculate total migration per unit surface area. Solvent selection depends on whether the packaged food item is aqueous, acidic, or fatty.
Limit Assessment
Overall migration limits set maximum allowable chemical transfer thresholds for food contact packaging approval. High values obtained from total immersion extraction indicate potential chemical safety compliance failures for specific board grades. Functional barrier films reduce measured migration levels by blocking solvent penetration into the paperboard core.
Testing data guides paper mills in optimizing chemical additive dosage during wet-end processing. Statutory compliance relies on keeping total extractable mass below established legislative limits.