Crease Displacement
An asymmetrical fold behavior occurs when the raised crease in paperboard does not fold along its centerline. This defect, known as bead rollover, happens when the internal bead created by a creasing rule shifts or collapses to one side during the folding process. The board fails to bend at the intended crease axis, which causes the outer face of the carton to bulge or skew.
The mechanical profile of the crease dictates whether the fold stays true or rolls.
Fibre Compression
When paperboard is compressed by a creasing rule, the board splits internally into multiple delaminated layers to form a hinge. If the width of the crease channel is too wide or if the crease is too shallow, the delaminated layers do not fold evenly. This insufficiency of localized delamination leads to bead rollover because the stiff board resists the fold.
Force must be applied evenly across the board thickness to prevent the bead from rolling toward the weaker side of the score line.
Carton Alignment
The displacement of the fold line affects the downstream operations of high-speed folder-gluers. A carton suffering from bead rollover cannot be glued in a straight line, which leads to skewed boxes and jam-ups on the packing line.