Evaluation Methodology
Standardized industrial assessment frameworks define laboratory re-pulping and screening criteria to determine whether fibre-based packaging qualifies as fully recyclable within paper mills. Published by the Confederation of European Paper Industries, the Cepi 4.0 guidelines harmonize test procedures across standard recycling mills and deinking plants. The framework evaluates disintegration efficiency and screening yield to establish objective thresholds for packaging designers and paper converters.
Structural boundaries limit the standard to pulpable paper and board grades, excluding products processed through synthetic polymer recycling systems or composting pathways.
Mill Screening
Secondary fibre processing relies on mechanical screening stages to extract non-fibrous foreign elements before sheet formation. Testing under the Cepi 4.0 guidelines measures coarse rejects larger than five tenths of a millimetre alongside fine stickies that bypass primary slotted screens. High levels of adhesive contamination or polymeric barrier fragments diminish yield values below acceptable mill thresholds.
Flotation deinking stages receive independent scoring when printed products undergo assessment for graphical paper recycling streams.
Laboratory Protocol
Controlled laboratory disintegrators operate under specific thermal, chemical and mechanical agitation conditions during repulping trials. Specimen evaluation follows a two-tiered schedule where basic packaging constructions pass standard disintegration at forty degrees Celsius without chemical additives, while complex barrier structures undergo advanced pulping routines. Hand sheets produced from accepted pulp stock undergo optical scanning to quantify visual dirt counts and adhesive specks against defined reference surfaces.
Disintegration failure occurs when intact paperboard pieces or unseparated polymer laminates exceed standard mass limits on the screening plate. The methodology ceases to classify material as recyclable when macro-sticky areas exceed targeted limits per kilogram of dry pulp.