Optical Synthesis
Optical measurement systems combining two distinct illumination sources extend the synthetic wavelength to resolve steep surface topographies without phase ambiguity. Dual-wavelength interferometry measures surface profiles of rough paper, textured coatings, and micro-embossed packaging films where single-wavelength methods fail due to fringe phase wrapping. Superimposing interferograms from two laser wavelengths generates an effective synthetic wavelength larger than either individual optical wavelength.
Surface height discontinuities larger than half the optical wavelength become readable without phase unwrapping errors.
Range Extension
Light from two laser diodes or filtered sources illuminates the target substrate and reference mirror simultaneously or sequentially. Reflected beams recombine at the optical detector, generating separate interference patterns for each wavelength. Phase differences calculated at both illumination wavelengths yield a beat frequency interference signal corresponding to the synthetic wavelength.
This synthetic signal allows direct height mapping over surface steps reaching several micrometers. Paper coaters utilize this optical setup to measure surface roughness across uncalendered sheets and heavy board stocks. High noise levels in individual phase signals multiply in the synthetic phase calculation, requiring high signal-to-noise photodetectors.
Environmental vibrations introduce differential phase noise between sequential laser exposures unless dual-camera setups capture both wavelengths at once.
Surface Mapping
Height profiling accuracy degrades when surface reflectivity falls below minimum camera sensitivity limits. Micro-structure slopes exceeding the numerical aperture of collecting optics cause signal loss.