Thickness Variation
Blown and cast polymer films require a highly uniform thickness profile across the entire web width to ensure consistent winding. When localized thickness accumulations persist in the machine direction, gauge band defects develop as a consequence of non-uniform die gaps or uneven die lip temperatures. These localized thick areas form raised rings around the wound roll during continuous production.
Over thousands of revolutions, these small deviations accumulate to create highly pressurized bands that stretch the material past its elastic limit, causing permanent deformation of the plastic substrate.
Mechanical Impact
High tension concentrations within these elevated regions alter the stress distribution across the roll body. Since the roll diameter increases locally at the thick bands, gauge band defects cause unequal web tension across the width during subsequent unwinding processes. This tension variation leads to tracking problems and localized web bagging on downstream equipment.
Converting Hindrance
Uneven material distribution impairs printing precision because the sagging portions of the web do not make uniform contact with the impression cylinder. When processing these deformed materials, gauge band defects cause misregistration and ink smearing. Corrective actions require oscillating die heads or thickness measurement scanners to distribute the variation evenly across the roll.