Displacement Measurement
Air resistance testing of porous sheet materials measures the time required for a specified volume of air to pass through a defined area of paper under standard displacement pressure. Designated as gurley permeability, this physical property indicates the internal structural density and void fraction of paper and paperboard substrates. Standard testing uses a cylinder falling under its own weight within a liquid seal to displace one hundred cubic centimeters of air through a one-square-inch circular test area.
Results are expressed in Gurley seconds, where higher time values represent lower air porosity and a denser sheet structure. Temperature and relative humidity control maintain consistent air density and paper moisture content during measurement.
Structural Density
Internal void volume and fibre bonding directly dictate the speed of air displacement through the paper matrix. Refining pulp stock increases fibre hydration and fibrillation, which compacts the web and increases gurley permeability by reducing internal air passages. Calendering operations flatten surface fibres and collapse inter-fibre voids, elevating air resistance values considerably.
High filler content using mineral pigments can either increase or decrease porosity depending on particle size distribution and agglomeration behavior. Dense paper grades such as glassine or greaseproof paper register values exceeding thousands of seconds, whereas porous filter papers yield values under ten seconds. Wet-end starch additions enhance inter-fibre bonding, closing micro-voids and increasing air flow resistance.
Multi-ply paperboard structures show cumulative air resistance based on the combined density of individual plies. Microscopic air pathways follow tortuous paths through the fibre network, making air resistance sensitive to z-direction density distribution.
Converting Impact
Porosity control governs adhesive absorption speeds during high-speed packaging assembly. Excessively open sheets allow liquid glues to strike through to the reverse face, causing equipment fouling and panel sticking. Conversely, extremely dense substrates slow water evaporation from aqueous adhesives, delaying bond setting times on packaging lines.
Vacuum cup handling equipment on automated cartoning machinery requires sufficient air resistance to lift and position folded carton blanks reliably.