Stock Preparation
Fibre slushing at low solids concentrations is a standard industrial method for converting dry pulp sheets and clean broke into a pumpable suspension. Implementing low consistency pulping typically operates at a fiber concentration of three to six percent by weight in water. This high water volume allows the rotor to generate high hydraulic shear that rapidly separates the fibers.
The low viscosity of the mixture makes it easier to pump the slurry directly through downstream cleaning and screening systems.
Slurry Dynamics
Recycling operations use different pulp densities depending on the contamination level of the incoming wastepaper bales. While high-consistency systems are preferred for heavily contaminated post-consumer waste, low consistency pulping is the choice for virgin fibers and mill broke because it requires less capital equipment. The high water content allows heavy contraries to settle quickly to the bottom of the vat where they can be removed without damaging the rotor or the extraction plate.
This configuration simplifies the stock preparation line and reduces the energy consumed by auxiliary sorting machinery. It provides a clean, well-dispersed fiber stock for high-speed paper machines.
Process Limit
Large volumes of water must be handled and recycled in this process, which increases the pump energy and the capacity required for water treatment. In winter, heating this large mass of water to the required pulping temperature can become expensive for mills running specialty grades. Therefore, the choice of operating consistency is a trade-off between pulping speed and thermal energy efficiency.