Transfer Interface
The compression zone between two rotating cylinders facilitates the transfer of ink from a blanket to a paper web or sheet. In the offset printing nip, the pressure forces the fluid ink into the surface voids of the substrate to ensure complete coverage. This contact happens at high speeds, often lasting only a few milliseconds.
The geometry of the contact area determines the quality of the dot reproduction.
Pressure Distribution
Managing the force within the contact zone is necessary to prevent dot gain and paper distortion. As the cylinders rotate, the offset printing nip creates a pressure profile that peaks at the center and tapers toward the edges of the contact area. Excessive pressure can crush the paper fibers or cause the ink to spread beyond its intended boundaries.
Technicians adjust the packing behind the blanket to control the width of the nip and the intensity of the squeeze. A wide contact area might improve ink transfer on rough papers but can lead to slur in fine halftone areas.
Deformation Control
Substrates undergo physical changes as they pass through the pressurized gap. The offset printing nip exerts both vertical compression and lateral shear on the paper. These forces can cause the sheet to stretch or fan out, requiring careful tension control to maintain registration between different color stations.