Standard Test
Standardized laboratory evaluation of the chemical solvent resistance and mechanical cross-linking density of organic coatings applied to rigid or semi-rigid substrates defines solvent rub test ASTM D5402 across converting and packaging industries. The procedure prescribes manual or automated back-and-forth passes using a solvent-saturated cloth along a measured test area until coating failure or a predetermined rub count is attained. In paperboard packaging, this standard controls the curing verification of ultraviolet, electron beam and heatset barrier coatings, stopping where substrate degradation or coating breakthrough occurs.
The test isolates chemical surface integrity without measuring substrate mechanical tear resistance or core board stiffness. Methyl ethyl ketone serves as the primary test solvent, while isopropyl alcohol acts as a milder alternative for sensitive packaging inks. Over-cured coatings resist chemical dissolution but micro-crack, whereas under-cured films smear immediately.
Test Execution
Executing this standard demands wrapping sixteen-ply cotton cheesecloth around the pointed hammer head of an automated rub tester or an operator’s index finger, holding the assembly at a forty-five-degree angle to the coated sheet. Saturating the cloth with industrial grade methyl ethyl ketone introduces the solvent, after which the operator executes continuous double rubs across a one-hundred-millimetre linear path using a constant downward force of approximately nine to thirteen Newtons. One back-and-forth motion constitutes a single double rub.
The test proceeds until the coating softens, transfers pigment to the cloth or exposes the underlying paperboard base, recording the total rub count. Fifty double rubs without film breakthrough denotes fully cured ultraviolet overprint varnish on pharmaceutical folding cartons. Insufficient ultraviolet photoinitiator activation results in coating dissolution within ten double rubs, indicating unreacted monomer migration risks.
Manual testing introduces variation because stroke velocity, applied pressure and solvent evaporation rates vary between individual laboratory technicians.
Boundary Condition
Substrate porosity and surface absorption modify the operational boundary of the solvent rub test ASTM D5402. Uncoated or lightly coated paperboard absorbs volatile solvent through coating micro-pores, swelling raw fibres and falsifying rub results through physical substrate abrasion rather than chemical degradation. Evaluating soft matte coatings requires modifying endpoint criteria, because matte surface additives burnish and change gloss long before cross-linked resin matrix failure occurs.