Directional Conductivity
Geometric properties within a multi-layer material often vary according to the geometric axis of measurement. The phenomenon of anisotropic heat transfer occurs when thermal energy moves through a paper web at different rates along the machine direction compared to the thickness of the sheet. Lignin and cellulose fibres conduct heat more efficiently along their longitudinal axis.
Consequently, the rate of dissipation across the surface usually exceeds the rate of penetration into the stack.
Fibre Orientation
Structured alignment of the fibrous network determines the specific thermal profile of the board. During the drying process at the paper mill, anisotropic heat transfer dictates how quickly moisture evaporates from different depths of the sheet. Heat travels roughly twice as fast along the fibres as it does through the air pockets between them.
This variance creates internal stresses if the temperature change is too rapid.
Thermal Gradient
Measurement of this property requires specialized sensors to account for the three-dimensional nature of the heat flow. Because the thermal resistance in the thickness direction is much higher, the anisotropic heat transfer often leads to surface cooling while the core remains hot. This lag affects the bonding of laminates and the setting of heat-seal coatings on high-speed packaging lines.
Thermal stability depends on managing these disparate rates of energy movement.