Thermal Decomposition
Pyrolytic degradation breaks down complex polymer structures inside high temperature reaction vessels. Thermal treatment within an auger kiln depolymerization configuration converts waste packaging plastics into lower molecular weight hydrocarbon gases and oils. Mill operators apply this continuous heating method to recover petrochemical feedstocks from laminated paperboard and multi layer barrier films.
Internal screw flights push solid scrap steadily through a heated metal cylinder under oxygen starved conditions. Controlled residence times prevent complete combustion while driving the breakdown of polyethylene and polypropylene chains.
Residue Separation
Solid char fractions separate immediately from volatile vapors at the discharge end of the rotating screw mechanism. Mechanical sorting units route recovered carbon black and inorganic fillers away from condensing towers. Downstream distillation columns fractionate the cooling hydrocarbon vapors into distinct liquid fuel grades and wax precursors.
Conversion facilities manage heavy wax fractions by recycling them back into the feed hopper for secondary cracking cycles. Condensation traps capture volatile acid gases generated during the thermal scission of chlorine containing polymer additives.
Mass Balance
Chemical mass accounting tracks total input scrap weight against the combined output yield of gas, liquid oil and solid char. Process efficiency calculations depend on accurate temperature profiling across multiple heating zones along the cylinder length. Energy consumption values per metric ton of processed packaging waste dictate the economic viability of the reclamation line.
Operators adjust motor speeds to alter the solid retention interval when moisture levels in incoming laminate scrap fluctuate. Total hydrocarbon recovery percentages verify whether the thermal reactor maintains optimal operating parameters.