Tooling Profile
Dimensional profiles of the groove in a creasing matrix determine how paperboard fibers deform during the mechanical creasing step. This channel geometry must be matched precisely to the thickness of the board and the width of the creasing rule. Proper sizing prevents the board from cracking on the reverse side of the fold.
Operators use precision gauges to verify the channel depth.
Fold Performance
Frictional resistance and board displacement change dynamically as the creasing rule pushes the paperboard into the matrix. If the channel geometry is too narrow, the board will pinch and shear, which causes unsightly surface ruptures. Conversely, a channel that is too wide lacks definition and causes the carton to fold unevenly.
Finding the correct balance ensures consistent folding on high-speed gluer lines.
Crease Calibration
Mathematical calculations guide the selection of matrix dimensions based on board caliper and rule thickness. For a typical solid bleached sulfate board of four hundred microns, a channel geometry with a width of one point two millimeters and a depth of zero point four millimeters is recommended. This precise configuration reduces the bending resistance by up to fifty percent.
Such structural modification allows the board to bend smoothly without buckling or delaminating. Regular inspection of the matrix is necessary because wear can alter these critical dimensions and ruin the carton structure.