Controlled Environment
Environmental chambers designed for low temperature preservation of perishable goods maintain temperatures below five degrees Celsius to prevent biological decay. In this setting, cold storage places extreme physical demands on fiber-based packaging materials due to the continuous presence of moisture. Corrugated containers must retain their structural stiffness when exposed to these cold conditions over long cycles.
The boundary of this environment begins at the chiller entrance and extends to the final point of distribution.
Condensation Hazard
Moisture accumulation occurs when packages are moved from chilled zones to ambient loading docks. This transition triggers dew point condensation on the exterior faces of the packaging boards, which rapidly weakens the structural integrity of the paperboard. In chilled transport networks, cold storage causes moisture absorption that can decrease the compression strength of a container by half.
Standard test procedures simulate these transitions to determine the rate of moisture uptake and subsequent loss of package stiffness. When the water molecules penetrate the fiber matrix, they disrupt the hydrogen bonds holding the cellulose chains together, causing the fibers to swell and slide past each other. This molecular weakening translates directly into bulging panels and eventual stack collapse.
Board Durability
Structural integrity in humid conditions relies on heavy use of moisture-resistant adhesives and virgin chemical pulp fibers. This design choice prevents the container from softening under the high relative humidity typical of cold storage areas. Standard packaging for wet environments employs specialized starch formulations that do not dissolve in cold water.
Kraft liners with high density provide the necessary barrier to maintain stack stability during distribution.