Thermal Metric
Radiative energy emitted by a moving web of paperboard determines the thermal state of the material during the drying phase. This property, known as infrared surface temperature, indicates the rate of water evaporation from the pulp slurry as it travels through the machine. Monitoring this value helps operators detect wet streaks and thermal imbalances across the sheet before the roll is wound.
The measurement is effective across all standard grammages of paperboard.
Measurement Method
Non-contact sensors placed along the drying section collect thermal radiation at specific infrared wavelengths to calculate the surface heat. These pyrometers operate without touching the delicate, wet web, avoiding any risk of marking or tearing the paper. In modern converting lines, infrared surface temperature is used to verify that the coating layer has reached the correct temperature for curing.
If the temperature is too low, the coating may not crosslink properly, leading to flaking or poor ink adhesion during subsequent print runs. The system processes these heat readings to adjust the intensity of the gas-fired infrared dryers in real time.
Drying Optimization
Energy efficiency increases when the heating hoods respond directly to these real-time thermal readings. This feedback prevents over-drying, which can embrittle the paper fibers and cause cracking when the board is folded. Stable thermal control ensures uniform moisture distribution across the entire board.