Structural Dissociation
Separation between the corrugated medium and the linerboard happens when the adhesive bond fails under mechanical or environmental stress. This corrugated board delamination compromises the compression strength and stacking capability of a finished box. It marks the point where the combined board ceases to act as a single rigid unit.
Adhesive Mechanism
Bond failure often originates from insufficient starch gelatinization or improper heat application during the corrugating process. In cases of corrugated board delamination, the failure may occur at the interface of the paper and the glue or within the paper fibres themselves. Moisture levels in the liners influence the ability of the adhesive to penetrate and anchor into the substrate.
If the moisture is too high, the starch does not set correctly. Insufficient wetting occurs when the paper surface is too dry, making it resistant to the adhesive.
External Stress
Mechanical forces during shipping or handling frequently trigger the separation of layers that were weakly bonded during conversion. High humidity environments weaken the starch bridges and make corrugated board delamination more likely during long-term storage. Testing for this defect involves edge-pull methods or pin adhesion tests that quantify the force required to pull the liners away from the fluted tips.