Solvent Analysis
Analytical testing procedures measure total extractable organic substances and non-volatile residues present in paperboard substrates intended for food contact applications. The laboratory technique known as hexane ethanol extraction uses a dual-solvent mixture to dissolve non-polar fats and polar chemical additives from paper samples. Packaging converters evaluate extractable levels to ensure compliance with food packaging safety standards.
Laboratory Procedure
Standardized testing protocols require immersing prepared paperboard specimens in a combined solution of n-hexane and ethanol under controlled temperature and duration settings. During hexane ethanol extraction, the non-polar hexane fraction targets residual mineral oils and synthetic waxes, while the polar ethanol fraction extracts residual resins and organic additives. The solvent mixture is evaporated under reduced pressure in a rotary evaporator, leaving a dried residue that is weighed on an analytical balance to four decimal places.
Expressed in milligrams per square decimetre of board surface, this residue weight quantifies total migrateable organic matter. Paper mills adjust internal sizing dosages and wet-end chemical additions when extraction yields exceed maximum regulatory thresholds.
Migration Standard
Food contact regulations establish strict upper limits on total extractable matter to prevent chemical contamination of dry and fatty foodstuffs. Packaging boards failing extractability criteria cannot be certified for direct contact with dry bakery or confectionery products. Hexane ethanol extraction measures overall chemical extractability and does not identify specific chemical species without secondary chromatographic analysis.