Signal Interference
Reduced ionization efficiency of target analytes in mass spectrometry occurs when co-eluting compounds from the sample matrix compete for charge. In packaging analysis, matrix ion suppression is a common challenge when testing paper board extracts for contaminants or residual solvents. This effect can lead to falsely low quantitative measurements.
Analysts must identify these interferences during method validation.
Analytical Compensation
Calibration strategies must account for these chemical interferences to prevent inaccurate reporting of food-contact safety data. To minimize matrix ion suppression, laboratories use matrix-matched calibration curves or isotope-labeled internal standards. These standards undergo the same ionization fluctuations as the target chemicals, which allows the instrument software to correct the final calculated concentration.
Utilizing these methods ensures that the reported migration levels are reliable and legally defensible.
Extraction Chemistry
Chemical separation through liquid chromatography reduces the concentration of interfering compounds before they enter the mass spectrometer. Diluting the paper extract or applying solid-phase extraction can also mitigate matrix ion suppression by separating the target molecules from paperboard additives like sizing agents and optical brighteners. This step is particularly important when analyzing trace levels of perfluorinated substances or plasticizers in complex food-simulating solvents.
Although additional preparation steps increase the total analysis time, they are necessary to prevent the soft-ionization source from becoming saturated with matrix components.