Moisture Distribution
Water distribution across the width and depth of a newly wound paper roll requires uniform profile control to prevent winding defects. The reel moisture gradient describes the variations in moisture content measured across the cross-direction and the machine-direction of the paper machine as the reel is being formed. It is caused by uneven drying in the hood section or uneven steam application from the moisturizing sprays.
Eliminating this gradient is essential because localized wet or dry streaks create uneven tension during subsequent winding and slitting operations.
Converting Failure
Uneven moisture in the roll causes structural issues when the paperboard is unwound for printing or lamination. High-moisture areas experience more stretch, leading to baggy lanes that cause web breaks or register errors on high-speed press lines. In contrast, dry areas can become brittle, causing the board to crack during the creasing and folding steps of carton manufacture.
Running the paperboard through a corrugator when such a gradient is present often leads to severe warp issues that halt the converting line.
Mill Calibration
Paper mills monitor and control this variable using online scanner systems located before the reel-up stand. These scanners direct computerized spray beams to add moisture selectively, smoothing out the profile.