Chemical Introduction
Controlled addition of polymers to the thin stock to improve the capture of fines and fillers on the forming fabric. Effective retention aid dosing ensures that expensive raw materials like titanium dioxide do not wash through the wire into the white water system. These chemicals are typically high molecular weight acrylamides or starches.
They are injected into the approach flow system just before the headbox.
Flocculation Dynamics
Bridging between small particles and long fibres occurs when the long polymer chains attach to multiple surfaces. If the retention aid dosing is too low, the sheet will lack opacity and the white water will become overloaded with solids. Over-dosing can lead to large, tough flocs that ruin the formation and cause holes in the paper.
The chemical must be diluted significantly before injection to ensure even distribution throughout the slurry.
Drainage Efficiency
Vacuum levels in the drainage elements respond to the size and stability of the flocs formed. Proper retention aid dosing creates a porous mat that allows water to escape quickly while holding onto the small particles. This balance allows the paper machine to run at higher speeds without sacrificing sheet quality.
If the dosing pump fluctuates, the drainage rate will change and cause tension variations in the web. Automated control systems often use white water consistency sensors to adjust the pump speed in real time.