Chemical Proxy
Regulatory compliance for food contact materials requires the use of standardized substances to model the migration of chemicals from packaging. Simulant e is a synthetic adsorbent, often poly(2,6-diphenyl-p-phenylene oxide), used to represent dry and non-fatty foods. It is specifically designed to capture volatile and semi-volatile organic compounds that might move from paper or board into the food.
This material is widely used in European testing protocols.
Analytical Procedure
Laboratory technicians place the adsorbent in direct contact with the test substrate for a specific duration and at a controlled temperature. Because simulant e has a high affinity for organic contaminants, it effectively extracts substances like mineral oils or plasticizers from the fibres. After the exposure period, the simulant is removed and the absorbed chemicals are measured using gas chromatography.
Once the compounds are identified, their concentrations are compared against specific migration limits set by government agencies. Simulant e ensures that these evaluations are consistent across different laboratories. The process relies on the fact that the simulant does not chemically react with the packaging material itself.
This ensures that the measured migration results from physical transport and excludes chemical breakdown of the paperboard. The results are expressed as milligrams of substance per kilogram of food.
Methodological Boundary
Physical contact between the adsorbent and the substrate must be maintained to ensure a valid test result. While simulant e is effective for many dry foods, it does not accurately model the behaviour of liquid or fatty substances. The particle size of the adsorbent can influence the extraction efficiency and must be strictly controlled.
Testing at high temperatures may alter the physical state of the simulant and lead to inconsistent readings.