Extrusion Methodology
Mechanical processing uses two intermeshing shafts to mix polymers with additives and fillers. Through twin-screw compounding, a manufacturer can create a homogeneous melt with precise properties for extrusion or injection moulding. The screws rotate within a heated barrel, providing both transport and intensive mixing of the raw materials.
This setup is more effective than single screw systems for dispersing fine pigments or reinforcing fibres.
Mechanical Shearing
Shear forces generated between the screws and the barrel wall break down agglomerates and distribute the ingredients evenly. In twin-screw compounding, the design of the screw elements can be customized to provide different levels of kneading and mixing. This flexibility allows for the processing of heat sensitive materials by controlling the energy input.
Material Throughput
Production rates depend on the screw speed and the feed rate of the individual components. For twin-screw compounding to be efficient, the moisture content of the raw materials must be kept low to prevent the formation of steam bubbles in the melt. The process reaches a limit when the viscosity of the mixture becomes too high for the motor to drive the screws or when the heat generated by friction exceeds the thermal limits of the polymer.
Cooling systems along the barrel manage the temperature to ensure a consistent output quality.