Standard Protocol
Standard laboratory test protocols measure the aerobic biodegradation of synthetic or biobased materials in terrestrial environments. Evaluation through astm d5988 utilizes closed systems where the test material is mixed with a specific soil mixture to monitor carbon dioxide generation. This procedure offers a reproducible metric for agricultural mulch films and soil-disposed packaging.
It does not measure anaerobic degradation.
Measurement Procedure
Respirometric conversion acts as the primary means of quantitation within the controlled vessel. Sealed flasks containing soil and test substrate undergo continuous aeration or periodic agitation to maintain aerobic conditions. Carbon dioxide released by microbial respiration is captured in an alkaline solution and quantified by titration or by direct infrared detection.
The calculated ratio compares cumulative carbon dioxide generation against the theoretical maximum of the substrate. Bioplastic films and coated papers intended for packaging are typically ground to increase surface area before mixing. This modification speeds up initial microbial colonization and ensures that physical breakdown does not limit the chemical oxidation rate of the polymer during the assessment period.
Operational Limit
Environmental conditions within the test chamber depend heavily on soil characteristics such as moisture content, microbial activity, and temperature which must remain within strictly defined bounds. The test runs until a plateau in gas evolution is reached, which often requires several months of continuous monitoring. High clay content or low microbial density can retard the degradation rate, skewing the reported values.
It provides no information on aquatic or marine breakdown rates.