Polymer Dispersion
Aqueous synthetic or bio-based polymer emulsions form non-porous surface coatings that restrict chemical transport across paperboard substrates. Formulations of barrier latex typically combine styrene-butadiene or acrylic copolymers to achieve cohesive film continuity. The dispersion fills surface pores on the raw stock before setting.
Drying converts the liquid phase into a solid hydrophobic barrier capable of retaining volatile fats and moisture.
Film Coalescence
Drying temperature and air velocity control the rate at which discrete suspended polymer spheres deform into a continuous solid layer. Inadequate heat during drying leaves microscopic voids between polymer particles where water vapor or oil can penetrate. Operating temperatures must exceed the minimum film formation temperature of the resin to force particle fusion.
Excess drying thermal energy creates micro-blisters that breach the barrier structure. Uniform heat delivery preserves structural integrity across the web.
Permeation Resistance
Resistance to liquid migration depends directly on polymer crosslink density and the resulting surface tension differential between the liquid medium and the coating. Standardized oil resistance tests measure oil holdout over defined durations to evaluate pinhole frequency. Cold grease testing exposes folded carton edges to fatty acids at elevated temperatures to identify stress cracking along creased folds.
Water vapor transmission rates drop towards zero when pinhole density approaches zero. The performance ceiling of barrier latex is governed by mechanical cracking during high-speed folding rather than raw chemical permeability.