Enclosure System
Metering assemblies used in high speed flexographic printing consist of two blades held against an anilox roller within a manifold. The chamber doctor blade maintains a consistent volume of ink or coating within the space between the leading and trailing edges. This configuration prevents evaporation and maintains the viscosity of the fluid.
Fluid Control
Ink delivery relies on the precise contact between the ceramic surface of the anilox and the steel or plastic tips of the blades. In this arrangement, the chamber doctor blade creates a pressurized environment that forces ink into the engraved cells of the roller while wiping the excess from the surface. Centrifugal forces at high press speeds are contained by the enclosed housing, which stops the misting often seen in open fountain systems.
The seal at the ends of the manifold prevents leakage during continuous operation. Consistent hydraulic pressure across the full width of the press ensures uniform colour density from the drive side to the operator side.
Wear Profile
Friction between the blade edge and the rotating cylinder eventually degrades the contact geometry. A worn chamber doctor blade results in streaks or uneven lay down on the substrate. Regular replacement cycles prevent the loss of print definition on corrugated board or flexible films.