Standard Specification
Paper test protocol ISO 535 defines the standardized method for determining the mass of water absorbed by sized paper and board over a set contact period. Commercial packaging converters specify cobb sizing ISO 535 values to verify liquid resistance before applying water-based adhesives or barrier coatings. The method applies to corrugated fluting and folding boxboard substrates intended for humid storage environments.
Highly absorbable tissue papers and non-wet-strength papers fall outside the validity range of this testing procedure.
Test Protocol
The physical apparatus clamps a one hundred square centimeter specimen beneath a rigid metal cylinder before pouring deionized water onto the exposed sheet surface. Internal timers track the exposure duration, typically set to sixty seconds for standard paperboard or three hundred seconds for heavy barrier board. At the conclusion of the test interval, operators pour off the unabsorbed water, unclamp the sheet and blot excess liquid using standardized blotting paper under a heavy metal roller.
The dry weight subtracted from the wet weight yields the absorbed water mass expressed in grams per square meter. Precise control of water temperature at twenty-three degrees Celsius prevents viscosity variations that would skew liquid uptake measurements. Internal sizing additives like alkyl ketene dimer reduce surface energy to limit liquid movement into the porous fiber matrix.
Liquid Penetration
Poorly sized paperboard absorbs excessive moisture, causing fiber swelling and dimensional instability across converting operations. When liquid absorption exceeds specified limits, box strength under stacking loads degrades rapidly.