Sizing Standard
Calculation methods for determining the channel width of a crease matrix establish the optimal clearance required to form a durable crease in paperboard packaging. The crease matrix rule uses a formula where channel width equals one point seven times the board thickness plus the width of the steel rule. Such proportioning prevents the rule from shearing the board fibres while ensuring sufficient force to create a well-defined crease.
Failure to apply this calculation results in cracked linerboard or weak creases that fail on high-speed filling lines.
Converting Mechanism
Affixing a plastic or pertinax strip to the steel cutting plate creates a precise channel into which the creasing rule forces the board. The steel rule must press the paperboard to approximately half its original thickness, displacing fibres to form a permanent bead. Correct channel depth matches the board thickness exactly, which forces the tension of the outer liner to distribute evenly across the shoulder of the crease.
When the channel is too narrow, the steel rule cuts the board, whereas a channel that is too wide generates a loose fold that wanders during high-speed folding. This displacement creates a permanent hinge that dictates the final squareness of the carton.
Operational Tolerance
Maintaining a variance of less than five percent in board caliper is necessary to prevent inconsistent crease behavior. If board thickness increases beyond this limit, the crease matrix rule must be recalculated. Mill-run consistency directly affects how the finished carton handles on the packaging line.