Purity Evaluation
A standardized German testing protocol defines the analytical procedure to determine the asphaltene content in petroleum hydrocarbons used for formulating packaging adhesives and printing inks. The application of DIN 51635 ensures that the heavy solvent fractions and mineral oils blended into offset inks contain no insoluble asphaltic compounds that could compromise pigment dispersion. By measuring the fraction of hydrocarbons that remain insoluble in heptane but dissolve in toluene, the method establishes a benchmark for solvent purity.
Coating Prevention
High levels of asphaltenes in raw hydrocarbon solvents lead to severe printing defects during high-speed runs. When printing houses utilize inks formulated with solvents that fail DIN 51635, the insoluble matter causes progressive buildup on the printing plates and gravure cylinders. This accumulation requires frequent wash-ups, increases press downtime, and leads to unacceptable streaking on the paper substrate.
Low-asphaltene solvents prevent these issues, ensuring smooth ink transfer and consistent color density across long runs of folding cartons.
Quality Assurance
Technical specifications for food-contact packaging coatings demand strict control over the residue limits of any petroleum-derived ingredients. Adhering to DIN 51635 provides paper converters with a reliable verification step when sourcing paraffin waxes and hot-melt adhesives from chemical suppliers. Because food safety authorities impose zero-tolerance rules for migrating aromatic hydrocarbons, the purity of the barrier coating must be verified before the board is run through the folding line.
This testing method remains standard for incoming material inspections at conversion facilities, providing a repeatable measure of chemical hygiene before high-temperature coating application.