Force Distribution
Internal resistance characterizes the sliding forces acting between the layers of a multi-ply board or laminated structure when it undergoes bending. Engineers use flexural shear stress to evaluate how well the adhesive or internal fibre bonds hold the material together during a curve. This specific stress acts parallel to the cross section of the sheet.
It peaks at the neutral axis where the transition from compression to tension occurs.
Delamination Process
Mechanical loading forces the plies to attempt to slide past one another at different rates. Because flexural shear stress concentrates at the interface of different materials, it often exposes weaknesses in the starch application or the refining level of the middle plies. If the internal bond strength fails to meet the shear demand, the board experiences a catastrophic loss of stiffness.
The result is a noticeable bulging or creasing on the surface. Modern high speed folders require high internal bond strength to resist these internal forces during the folding sequence.
Structural Integrity
Ply bond requirements vary depending on the thickness and the radius of the fold. A thick folding boxboard generates higher levels of flexural shear stress than a thinner grade when both are bent to the same angle. Converting equipment that utilizes tight rollers increases the risk of failure in the outer layers.
Performance depends entirely on the ratio of shear strength to the bending moment.