Analytical Method
Mercury porosimetry characterizes the distribution of very small pores within a material by forcing a non-wetting liquid into the sample at elevated force levels. This high-pressure intrusion technique allows for the measurement of voids that are too small to be detected by air-permeability or low-pressure liquid tests. The method defines the internal architecture of coatings and paperboard surfaces at the microscopic level.
Physical Interaction
The procedure involves placing a dried sample in a penetrometer and gradually increasing the hydraulic pressure on the surrounding mercury. Because mercury does not naturally wet cellulose or mineral coatings, it will only enter a pore when the pressure overcomes the surface tension of the liquid at the pore mouth. Smaller pores require more pressure to fill.
By tracking the volume of mercury entering the sample against the applied pressure, the equipment generates a precise map of the void sizes. This physical characterization provides a benchmark for evaluating the uniformity of the coating application.
Substrate Application
Information gained from this analysis predicts how liquids like fountain solutions or ink solvents will move through a coating layer. A coating with a high volume of fine pores will likely exhibit fast setting times but may also cause excessive absorption of the ink binder. This leads to a loss of surface gloss or a change in the final printed color.
Manufacturers use these results to adjust the pigment shape and binder content of their coatings.