Extraction Solvent
Hydrocarbon test media provide standardized chemical substitutes for real fatty food matrices during rigorous laboratory migration and extraction testing. Iso-octane simulant designates 2,2,4-trimethylpentane used as a volatile substitute for food simulant D2, which normally consists of vegetable oils. The low boiling point and non-polar nature of this solvent facilitate accelerated screening of non-polar migrants from paper, board, and polymeric coatings without interfering with downstream analytical chromatography.
The application of this fluid is strictly confined to food contact testing protocols, terminating where polar extraction testing or aqueous contact systems apply.
Testing Action
High-affinity non-polar liquids penetrate plastic coatings and cellulosic fibres much faster than natural triglycerides do. European migration standards specify this solvent for alternative or substitute testing when olive oil or sunflower oil creates chromatographic interferences during gas chromatography mass spectrometry analysis. The test procedure exposes board specimens, coated barrier laminates, or inner pouches to liquid iso-octane across specified contact durations and temperatures, such as two days at twenty degrees Celsius or one day at forty degrees Celsius.
These conditions simulate long-term room-temperature storage or short-term heating of fatty foods. The solvent desorbs printing ink components, synthetic hydrocarbon waxes, functional resin plasticizers, and mineral oil hydrocarbons from the substrate. After the contact period finishes, analysts remove the solvent liquid, concentrate it by evaporation, and inject it directly into quantification instruments.
Barrier Qualification
Compliance protocols for barrier papers rely on extraction data to verify functional resistance against fatty substance migration. Functional mineral coatings, bio-polymer films, and water-based barrier coatings must prevent low-molecular-weight hydrocarbons from moving through the board matrix. Immersion in iso-octane simulant challenges the pinhole integrity and chemical resistance of water-based dispersion barriers.
Excessive mass extraction indicates deficient polymer crosslinking or micro-fissuring across creased scorelines. Packaging mills use these solvent results to confirm that paperboard barrier formulations provide sufficient protection before entering commercial food supply lines.