Chemical Treatment
Internal additives modify the liquid absorption properties of a paper web by distributing hydrophobic agents throughout the fibre network. The industrial process of matrix sizing involves adding these agents to the pulp slurry before the sheet is formed. These chemicals prevent water from saturating the internal structure of the board through capillary action.
The treatment remains effective until the material is subjected to high heat or mechanical shearing.
Hydrophobic Distribution
The application of chemicals such as alkyl ketene dimer or alkenyl succinic anhydride occurs at the wet end of the paper machine. When matrix sizing is performed, the molecules orient themselves so that their hydrophobic tails point away from the fibre surface. This orientation creates a barrier that resists the penetration of aqueous liquids like ink or water.
The retention of these chemicals depends on the charge balance of the pulp system and the presence of polymers. Successful bonding requires the complete drying of the sheet to trigger the chemical reaction. Alum is frequently used as a fixing agent to ensure the chemicals adhere to the negatively charged cellulose.
Surface Boundary
The effectiveness of the treatment reaches its limit when the surface energy of the fibres becomes too low for subsequent coating adhesion. Excessive use of matrix sizing can interfere with the bonding of thermoplastic films or the absorption of certain printing oils. Proper control ensures the paper remains functional for its intended converting process.