Mass Loss
Fibre suspension systems experience a reduction in dry solids density during the initial stage of stock preparation. Pulper shrinkage describes the unaccounted variance between the weight of virgin or recycled furnish added to the vat and the measurable fibre yield post-slush. This loss occurs through the departure of fines, fillers and soluble contaminants during the aggressive mechanical agitation required for slurry creation.
Small particles exit through the perforated extraction plate alongside the transport water, rendering them inaccessible to downstream mat formation.
Process Efficiency
Hydraulic energy input dictates the velocity at which contaminants exit the chamber. High rotation speeds increase the shear forces applied to the suspension, which facilitates the rapid detachment of ink and synthetic adhesives from cellulose surfaces. Operational standards prioritize the balance between effective defibering and the retention of short fibres to prevent excessive yield reduction.
Adjusting the pulping time minimizes the window during which fine matter can bypass the primary cleaning stages.
Material Accounting
Procurement departments define the yield profile of incoming raw material based on this established loss factor. Each tonne of input stock yields a predictable net tonnage after the separation of non-fibrous additives and rejects. Accurate tracking allows production planners to calibrate the consistency of the final sheet without risking grade drift.
Maintaining constant pressure on the extraction screen prevents the inadvertent throughput of usable long fibres. This measurement provides the baseline for total mass balance across the wet end of the paper machine.