Quality Metric
Quantification of the tendency for a multi-ply board to separate into its individual layers provides a measure of internal bonding efficiency. This delamination index is a benchmark for evaluating the strength of the interface between different fibre furnish types. It allows manufacturers to assess whether the bonding is sufficient for the mechanical stresses of printing and converting.
Stress Response
Mechanical forces encountered during high-speed printing often pull on the surface of the board with high intensity. If the delamination index indicates a low internal bond, the layers may pull apart as the ink tack exceeds the strength of the ply interface. This failure leads to blisters or the complete removal of the top ply, which halts production and ruins the aesthetic of the packaging.
Testing involves measuring the energy required to split the layers apart under standardised conditions. Refinement of the pulp and the addition of bonding agents are common ways to improve this value.
Measurement Scope
Evaluation of the bond strength occurs across the entire width of the machine to ensure consistency. A uniform delamination index is necessary to prevent localised failures that might occur only on one side of the sheet. Variations in the moisture profile or the pressure applied during the wet-end of the paper machine can cause fluctuations in this metric.
Monitoring these values helps operators maintain the structural integrity of the finished substrate.